Serial to Server – MODBUS
AT-SR-232/485-M
The Serial Device Server that can make serial device be equipped with networking capability instantly. It centrally manages the scattered serial device and hosts via network. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC.It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrumentand enviromental forces monitoring system.
Specifications
Specifications
Configuration Tool | WEB Configuration Management | ||||
Serial Standards | RS-232/RS-485 | ||||
MODBUS Support | Yes | ||||
Baud Rate | Custom (Default 115200) | ||||
Parity | None, Even, Odd | ||||
Data Bits | 8, 9 bit(including parity) | ||||
Stop Bits | 1, 2 | ||||
Serial Signal | RS-232: TxD, RxD, RTS, CTS, GND & RS-485: 2W D+, D-,GND | ||||
Pull High/Low Resistor for RS-485 | 10 kilo-ohms fixed value | ||||
Terminating Resistor for RS-485 | 120 ohm | ||||
RS-485 Data Direction Control | ADDC (Automatic Data Direction Control) | ||||
Galvanic Isolation | 2.5 kV | ||||
Reverse Voltage/ESD Protection for RS_485 | Yes | ||||
Warranty | 1 Year |